Now offering GL1500 Service

Jaws information


Engine serviced

Timing Belts new

Valve adjustment to OEM specs

Restored carburetors

Dynamic carb syncronization

Fresh oil/filter

Charging system 14.3 @ 2500 RPM

Beautiful hole free exhaust

Comprehensive restoration

Complete teardown 

White Bitwell handgrips

House of Kolor Paints (high dollar best quality show paint)

Not one piece ignored

newer tires

new plugs/ NGK caps

Custom Seat Pan/padding/cover

Custom fabricated rear fender section

Progressive rear shocks

Dust boots, and seals

One of a kind retro styling

it is an 80s bike right?  Well thought out design and color palates blend retro and modern styling together. Pearl and metallic paint is color shifting and different lights show different colors.  Details wrapped up with a matching helmet.

Modern Lighting

LED Headlight

LED Taillight

LED Brakelight

This bike has no blinkers. The wiring still present but harnesses removed and wires sealed and wires wrapped.


Sweet video

"Procrastinate" Features


Comprehensive Restoration

"Procrastinate" was completely disassembled, down to the frame. Each part was thoroughly cleaned, prepped and painted with high quality House of Kolor paints. This Retro styled Cafe Racer is fast, sounds killer and the highly detailed finishing touches will make it a hit at the local Bike night!

Multi Layered, Blood Red Kandy Paint

15 coats of  paint Was used to achieve this Ultra Deep, highly reflective paint color. Different color red and light red pearls were added to the top coat for even more pop!

Mechanically sound

The 900 CC 4 cyl engine has excellent compression across each cylinder. The valve clearances are set, and the oil is fresh. A perfectly synchronized, restored bank of carburetors, supplies the fuel, and the new matching red plug wires, NGK Plug Caps and NGK plugs, light the fire! This engine sounds SO SWEET through the period correct, equal length headers and new Slash cut mufflers. Topped off by New Avon tires, and re-conditioned brakes, front and rear.

Custom "2" up Cafe seat

This "Cafe Racer" is versatile. The seat, styled as a "Cafe" hump, allows for fun for two! The lower seat trim (tail light) is a custom piece, bolted to the frame, and equipped with an ultra bright LED Taillight strip. The headlight is also a 6500K LED. Sitting in front of an OEM triple tree, with slide over fork tube bars, with Dury grips!

The little details matter

Look closely.. all the black on the bike is covered by a beautiful red pearl, adding the perfect touch to the package. A painted to match, Venom Digital gauge, keeps tabs on speed and RPMS, with an easy to see and read digital display.


Video 1. Walk around and Cold start up

Video 2. Mid build Walk around

1970 Honda ct70 Restoration highlights


Complete dis-assembly

This bike was completely tore down into pieces for a complete and detailed restoration with a high quality result. Most wear items replaced with new parts and engine maintained and tuned with OEM maintenance procedures.

High quality materials.

I want my restorations to to surpass the OEM finishes and quality. The use of House of Kolor finishes assured this bike had the same colors, but the metallic and clear coat depth turns this little bike into a true showpiece.

"Iridium" Features:

1981 Honda CB900C Custom

Complete Resto Restoration

Complete Tear down to frame. All parts cleaned and refinished a Stunning Deep Purple Candy with layers of Blue and Violet pearls  layered in Multiple, hand sanded coats of Acrylic urethane Clear coat.. it truly has to be seen in person. The frame and engine is Jet Black with a Violet Pearl clear. The paint is highly radiant and shifts colors with the light it is STUNNING! Factory Headers to retain the AWESOME 4 into 4 Exhaust with custom angled, slash cut 3' baffles. It has a nice sporty inline 4 tone. KLX Bars provided a perfect bar height with a 1 " riser, and the Modern CBR Brake Master Cylinder clears the fairing by Millimeters.

High Quality Products

We feature House Of Color Products on each motorcycle we restore.

Custom Seat

Factory pan is modified and padding shaped to mimic angles and lines on the bike.. Recovered in Black Vinyl with thick gauge stitching to create an clean look.

Modern Gauges, Lighting and Stereo system

Modern lighting includes:

LED Headlight

LED Custom Taillight/ Brake light

Blue LED accent lighting for engine and under bike

Orange 10 MM LED in rear of frame for turn signals


New Speakers

Easy to read Dan-Moto 180. Nice sweeping RPM and digital speed readout. Includes Neutral, Oil, Turn, and High beam indicators.

Digital Volt meter

Fully Serviced

Most items have been services on the bike. Including but not limited to:

Brakes Pads Front and Rear

Fresh  Brake Fluid.  

Newer Charging rotor. 

New Tires

Fresh Oil Filter

New plugs, wires, Caps

New Coils

Caswell Lined Fuel Tank

Fork Dust seals

Awesomely smooth bike, it runs very nice, shifts well, and gets tons of attention. Its something different for sure. 

Mighty Mouse information


Full appearance restoration

Fabrication of rear seat section to a Bobber style. Retaining the factory rear fender and artwork hand painted on the tank front and rear fenders by Doug's friend ,in 1990, that passed away.

Complete comprehensive motorcycle refinishing

The entire motorcycle was disassembled after fabrication for complete refinishing. All frame and engine, but not limited to those pieces were sprayed with All House of Color products. Jet Black adorns the pieces, and followed up by a multi layered inter-coat clear with harvest pearl colors. The artwork existing was flattened, blended into new bodywork and highlighted with red and gold pearls. 4 coats of clear were added for depth and flatness over the existing hand painted art.

Rear seat and fender

Factory OEM fender was shortened. Metal was cut and added to "wrap" it under the seat. The rear is a one piece unit now, that contains the seat, fender and turn signals into one. It removes easily, with 4 bolts and one harness. The seat was also recessed into the fender for the correct line and fit. No seat springs were need as the factory soft tail springs were retained for the smooth ride.

Modern LED lighting

Replaced taillight with a nice LED unit on a custom fabricated mount including Taillight and Licence plate light. Red LED strip lighting lights up the beautiful engine and carburetor. 

Same owner since 1987

Doug couldn't let it go away! Too many memories of the "good ol days" with it. We all know how that feels! Doug and his wife, Susie decided on giving his bike a new life. Mighty Mouse is ready to keep reminding Doug of his "good ol times"  in the past, and with the new look on Mighty Mouse,  Doug and Susie can make many more! Thanks for letting me help with that!


1980 Honda CB 750 SS information



House of Kolor Paint provides the deep, glassy finish on all body, frame and suspension parts. Orion Silver with a hand sanded HOK Clear coat. The frame and suspension including but not limited to the brake calipers, forks, handlebars, master cylinders, hand levers and more have been refinished in HOK Jet Black with HOK Clear coat.

Plant your rear!

Additional padding and a fresh cover on the OEM seat.


Serviced items:



Brake fluid

Charging rotor

Recent tires

Euro Handlebars